<DIV><BR><BR>>On Thu, 20 Aug 2009, weiruyao wrote:<BR>><BR>>> After I restart the openswan ,the log in roadwarrior side shows:<BR>>> Mar 12 03:21:22 pluto[3984]: "tunnelipsec" #2: initiating Main Mode to<BR>>> replace #1<BR>>> Mar 12 03:21:22 pluto[3984]: "tunnelipsec" #2: ERROR: asynchronous<BR>>> network error report on eth0 (sport=500) for message to 192.168.1.104<BR>>> port 500, complainant 192.168.1.104: No route to host [errno 113, origin<BR>><BR>>This is a networking issue, not an openswan issue? Without openswan<BR>>running on either end, can you ping 192.168.1.104? if that works, can<BR>>you do "ipsec ikeping 192.168.1.104" ?<BR>></DIV>
<DIV>Withour openswan running on either end ,I can ping 192.168.1.104,but can't ipsec ikeping 192.168.1.104:</DIV>
<DIV>/ $ ipsec ikeping 192.168.1.104<BR>Sending packet to 192.168.1.104/500<BR>1 packets sent, 0 packets received. 100% packet loss</DIV>
<DIV>Only after I start openswan in both end ,ipsec ikeping 192.168.1.104 success:</DIV>
<DIV>/ $ ipsec ikeping 192.168.1.104<BR>v4 bind: Address already in use</DIV>
<DIV>Is it normall??</DIV><br><br><span title="neteasefooter"/><hr/>
<a href="http://www.yeah.net/?from=footer">没有广告的终身免费邮箱,www.yeah.net</a>
</span>