I am sorry for so many posts and flooding the mailing lists, but I am new to everything..including linux and openswan..Plz don't mind..<br><br>I am running the new kernel which i recompiled. I recompiled the same version of the kernel. (
<a href="http://2.6.18.8">2.6.18.8</a>). Here is what I get by dmesg. I observed one thing while the comp. boots. When IPSec service starts, it prints out that neither CONFIG_KLIPS or<br>CONFIG_NET_KEY are set and it fails and the booting of other services continues.
<br><br><span style="color: rgb(0, 0, 153);">Linux version <a href="http://2.6.18.8">2.6.18.8</a> (<a href="mailto:root@localhost.localdomain">root@localhost.localdomain</a>) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Wed Jul 18 19:10:46 PDT 2007
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">BIOS-provided physical RAM map:</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> BIOS-e820: 0000000000100000 - 000000000ff70000 (usable)
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> BIOS-e820: 000000000ff70000 - 000000000ff7e000 (ACPI data)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> BIOS-e820: 000000000ff7e000 - 000000000ff80000 (ACPI NVS)
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">0MB HIGHMEM available.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">255MB LOWMEM available.</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">On node 0 totalpages: 65392</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> DMA zone: 4096 pages, LIFO batch:0</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);"> Normal zone: 61296 pages, LIFO batch:15</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">DMI present.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Using APIC driver default</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: RSDP (v002 IBM ) @ 0x000f7010</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
ACPI: XSDT (v001 IBM TP-1I 0x00002080 LTP 0x00000000) @ 0x0ff731cd</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: FADT (v001 IBM TP-1I 0x00002080 IBM 0x00000001) @ 0x0ff73300
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: SSDT (v001 IBM TP-1I 0x00002080 MSFT 0x0100000d) @ 0x0ff733b4</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
ACPI: ECDT (v001 IBM TP-1I 0x00002080 IBM 0x00000001) @ 0x0ff7debc</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: TCPA (v001 IBM TP-1I 0x00002080 PTL 0x00000001) @ 0x0ff7df0e
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: BOOT (v001 IBM TP-1I 0x00002080 LTP 0x00000001) @ 0x0ff7dfd8</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
ACPI: DSDT (v001 IBM TP-1I 0x00002080 MSFT 0x0100000d) @ 0x00000000</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PM-Timer IO Port: 0x1008</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">Allocating PCI resources starting at 20000000 (gap: 10000000:ef800000)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Detected 1199.031 MHz processor.</span>
<br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Built 1 zonelists. Total pages: 65392</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Kernel command line: ro root=LABEL=/1 rhgb quiet
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Local APIC disabled by BIOS -- you can enable it with "lapic"</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
mapped APIC to ffffd000 (015bd000)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Enabling fast FPU save and restore... done.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Enabling unmasked SIMD FPU exception support... done.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Initializing CPU#0</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
CPU 0 irqstacks, hard=c1323000 soft=c1303000</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PID hash table entries: 1024 (order: 10, 4096 bytes)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Console: colour VGA+ 80x25</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Memory: 253412k/261568k available (1979k kernel code, 7532k reserved, 831k data, 232k init, 0k highmem)
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Checking if this processor honours the WP bit even in supervisor mode... Ok.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Calibrating delay using timer specific routine.. 2400.10 BogoMIPS (lpj=1200054)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Security Framework v1.0.0 initialized</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">SELinux: Initializing.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">SELinux: Starting in permissive mode</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
selinux_register_security: Registering secondary module capability</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Capability LSM initialized as secondary</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">Mount-cache hash table entries: 512</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">CPU: After vendor identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
CPU: Trace cache: 12K uops, L1 D cache: 8K</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">CPU: L2 cache: 512K</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">CPU: Hyper-Threading is disabled
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080 00000000 00000000 00000000</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Intel machine check architecture supported.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Intel machine check reporting enabled on CPU#0.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">CPU0: Thermal monitoring enabled</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Checking 'hlt' instruction... OK.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">SMP alternatives: switching to UP code</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Freeing SMP alternatives: 16k freed</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: Core revision 20060707</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
ACPI: setting ELCR to 0200 (from 0800)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">CPU0: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz stepping 04</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
SMP motherboard not detected.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Local APIC not detected. Using dummy APIC emulation.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Brought up 1 CPUs</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">migration_cost=0</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">checking if image is initramfs... it is
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Freeing initrd memory: 1363k freed</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">NET: Registered protocol family 16
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: ACPI Dock Station Driver </span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: bus type pci registered</span>
<br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Using configuration type 1
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Setting up standard PCI resources</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: Found ECDT</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">ACPI: Interpreter enabled</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: Using PIC for interrupt routing</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Root Bridge [PCI0] (0000:00)</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">PCI: Probing PCI hardware (bus 00)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">PCI quirk: region 1180-11bf claimed by ICH4 GPIO</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1</span>
<br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Boot video device is 0000:01:00.0</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Transparent bridge - 0000:00:1e.0</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: Power Resource [PUBS] (on)
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Linux Plug and Play Support v0.97 (c) Adam Belay</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">pnp: PnP ACPI init
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">pnp: PnP ACPI: found 13 devices</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">usbcore: registered new driver usbfs
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">usbcore: registered new driver hub</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Using ACPI for IRQ routing
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
PCI: Bridge: 0000:00:01.0</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> IO window: 3000-3fff</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> MEM window: d0100000-d01fffff
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> PREFETCH window: e8000000-efffffff</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Bus 3, cardbus bridge: 0000:02:
00.0</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> IO window: 00004000-000040ff</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> IO window: 00004400-000044ff
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> PREFETCH window: f0000000-f1ffffff</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> MEM window: d2000000-d3ffffff
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Bus 7, cardbus bridge: 0000:02:00.1</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> IO window: 00004800-000048ff
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> IO window: 00004c00-00004cff</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> PREFETCH window: f2000000-f3ffffff
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> MEM window: d4000000-d5ffffff</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Bridge: 0000:00:1e.0</span>
<br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> IO window: 4000-8fff</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> MEM window: d0200000-dfffffff</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);"> PREFETCH window: f0000000-f80fffff</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Setting latency timer of device 0000:00:1e.0 to 64</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: setting IRQ 11 as level-triggered</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
NET: Registered protocol family 2</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">IP route cache hash table entries: 2048 (order: 1, 8192 bytes)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
TCP established hash table entries: 8192 (order: 4, 65536 bytes)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">TCP bind hash table entries: 4096 (order: 3, 32768 bytes)</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">TCP: Hash tables configured (established 8192 bind 4096)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">TCP reno registered</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">Simple Boot Flag at 0x35 set to 0x1</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">speedstep: frequency transition measured seems out of range (0 nSec), falling back to a safe one of 500000 nSec.
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">speedstep-smi: you're trying to use this cpufreq driver on a Pentium 4-based CPU. Most likely it will not work.</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">IBM machine detected. Enabling interrupts during APM calls.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">apm: BIOS version 1.2 Flags 0x03 (Driver version
1.16ac)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">apm: overridden by ACPI.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">audit: initializing netlink socket (disabled)
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">audit(1184872903.751:1): initialized</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Total HugeTLB memory allocated, 0
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">VFS: Disk quotas dquot_6.5.1</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">SELinux: Registering netfilter hooks</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Initializing Cryptographic API
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">io scheduler noop registered</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">io scheduler anticipatory registered
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">io scheduler deadline registered</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">io scheduler cfq registered (default)
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">pci_hotplug: PCI Hot Plug PCI Core version: 0.5</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: Processor [CPU] (supports 8 throttling states)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: Thermal Zone [THM0] (32 C)
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Real Time Clock Driver v1.12ac</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Non-volatile memory driver v1.2</span>
<br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Linux agpgart interface v0.101 (c) Dave Jones</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">agpgart: Detected an Intel i845 Chipset.
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">agpgart: AGP aperture is 64M @ 0xe0000000</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Serial: 8250/16550 driver $Revision:
1.90 $ 4 ports, IRQ sharing enabled</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">pnp: Device 00:0a activated.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11</span>
<br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI interrupt for device 0000:00:1f.6 disabled</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ICH3M: IDE controller at PCI slot 0000:00:1f.1</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Enabling device 0000:00:
1f.1 (0005 -> 0007)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ICH3M: chipset revision 2</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">ICH3M: not 100% native mode: will probe irqs later</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Probing IDE interface ide0...</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">hda: IC25N040ATCS04-0, ATA DISK drive</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Probing IDE interface ide1...</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
hdc: HL-DT-STDVD-ROM GDR8081N, ATAPI CD/DVD-ROM drive</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ide1 at 0x170-0x177,0x376 on irq 15</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
hda: max request size: 128KiB</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63, UDMA(100)</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">hda: cache flushes not supported</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);"> hda: hda1 hda2</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
ide-floppy driver 0.99.newide</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Yenta: Using INTVAL to route CSC interrupts to PCI</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Yenta: Routing CardBus interrupts to PCI</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Yenta: ISA IRQ mask 0x04b8, PCI irq 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Socket status: 30000006</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf80fffff</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512]</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Yenta: Using INTVAL to route CSC interrupts to PCI
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Yenta: Routing CardBus interrupts to PCI</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Yenta TI: socket 0000:02:
00.1, mfunc 0x01d21022, devctl 0x64</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Yenta: ISA IRQ mask 0x04b8, PCI irq 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
Socket status: 30000006</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf80fffff</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">usbcore: registered new driver hiddev</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">usbcore: registered new driver usbhid</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">drivers/usb/input/hid-core.c: v2.6:USB HID core driver</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">serio: i8042 AUX port at 0x60,0x64 irq 12</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">serio: i8042 KBD port at 0x60,0x64 irq 1
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">mice: PS/2 mouse device common for all mice</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">md: md driver 0.90.3
MAX_MD_DEVS=256, MD_SB_DISKS=27</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">md: bitmap version 4.39</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">TCP bic registered
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Initializing IPsec netlink socket</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">NET: Registered protocol family 1
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">NET: Registered protocol family 17</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Using IPI No-Shortcut mode</span>
<br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: (supports S0 S3 S4 S5)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Time: tsc clocksource has been installed.</span>
<br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Freeing unused kernel memory: 232k freed</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Write protecting the kernel read-only data: 374k
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Time: acpi_pm clocksource has been installed.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">input: AT Translated Set 2 keyboard as /class/input/input0
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">USB Universal Host Controller Interface driver v3.0</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt 0000:00:
1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Setting latency timer of device 0000:00:1d.0 to 64</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">uhci_hcd 0000:00:1d.0: UHCI Host Controller</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">usb usb1: configuration #1 chosen from 1 choice
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">hub 1-0:1.0: USB hub found</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">hub 1-0:1.0: 2 ports detected</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Setting latency timer of device 0000:00:1d.1 to 64</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">uhci_hcd 0000:00:
1d.1: UHCI Host Controller</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">usb usb2: configuration #1 chosen from 1 choice</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
hub 2-0:1.0: USB hub found</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">hub 2-0:1.0: 2 ports detected</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt 0000:00:
1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Setting latency timer of device 0000:00:1d.2 to 64</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">uhci_hcd 0000:00:1d.2: UHCI Host Controller</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">usb usb3: configuration #1 chosen from 1 choice
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">hub 3-0:1.0: USB hub found</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">hub 3-0:1.0: 2 ports detected</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Synaptics Touchpad, model: 1, fw:
5.9, id: 0x2c6ab1, caps: 0x884793/0x0</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">serio: Synaptics pass-through port at isa0060/serio1/input0</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
input: SynPS/2 Synaptics TouchPad as /class/input/input1</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">kjournald starting. Commit interval 5 seconds</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">EXT3-fs: mounted filesystem with ordered data mode.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">SELinux: Disabled at runtime.</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">SELinux: Unregistering netfilter hooks</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">audit(1184872910.768:2): selinux=0 auid=4294967295</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">IBM TrackPoint firmware: 0x0e, buttons: 3/3</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">input: TPPS/2 IBM TrackPoint as /class/input/input2</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Uniform CD-ROM driver Revision: 3.20</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">ieee80211_crypt: registered algorithm 'NULL'</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">parport: PnPBIOS parport detected.</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">e100: Copyright(c) 1999-2005 Intel Corporation
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt 0000:02:
08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr 00:09:6B:C2:66:84</span>
<br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">hostap_pci: 0.4.4-kernel (Jouni Malinen <<a href="mailto:jkmaline@cc.hut.fi">jkmaline@cc.hut.fi</a>>)</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">hostap_pci: Registered netdevice wifi0
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">wifi0: Original COR value: 0x0</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">intel_rng: FWH not detected</span>
<br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">input: PC Speaker as /class/input/input3</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">prism2_hw_init: initialized in 598 ms
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">wifi0: NIC: id=0x8013 v1.0.0</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">wifi0: PRI: id=0x15 v1.1.0</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">wifi0: STA: id=0x1f v1.4.9</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Floppy drive(s): fd0 is 1.44M</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
FDC 0 is a National Semiconductor PC87306</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">wifi0: defaulting to bogus WDS frame as a workaround for firmware bug in Host AP mode WDS</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">wifi0: Intersil Prism2.5 PCI: mem=0xf8000000, irq=11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">wifi0: registered netdevice wlan0</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Setting latency timer of device 0000:00:
1f.5 to 64</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">orinoco 0.15 (David Gibson <<a href="mailto:hermes@gibson.dropbear.id.au">hermes@gibson.dropbear.id.au</a>>, Pavel Roskin <
<a href="mailto:proski@gnu.org">proski@gnu.org</a>>, et al)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">orinoco_pci 0.15 (Pavel Roskin <<a href="mailto:proski@gnu.org">proski@gnu.org
</a>>, David Gibson <<a href="mailto:hermes@gibson.dropbear.id.au">hermes@gibson.dropbear.id.au</a>> & Jean Tourrilhes <<a href="mailto:jt@hpl.hp.com">jt@hpl.hp.com</a>>)</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">intel8x0_measure_ac97_clock: measured 50383 usecs</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">intel8x0: clocking to 48000</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">PCI: Setting latency timer of device 0000:00:1f.6 to 64</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">lp0: using parport0 (interrupt-driven).
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">lp0: console ready</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">NET: Registered protocol family 10</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">lo: Disabled Privacy Extensions</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">IPv6 over IPv4 tunneling driver</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
[drm] Initialized drm 1.0.1 20051102</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">[drm] Initialized radeon 1.25.0 20060524 on minor 0</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: AC Adapter [AC] (on-line)</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">ACPI: Battery Slot [BAT0] (battery present)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: Power Button (FF) [PWRF]</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">ACPI: Lid Switch [LID]</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ACPI: Sleep Button (CM) [SLPB]</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
ibm_acpi: IBM ThinkPad ACPI Extras v0.12a</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ibm_acpi: <a href="http://ibm-acpi.sf.net/">http://ibm-acpi.sf.net/</a></span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">ACPI: Video Device [VID] (multi-head: yes rom: no post: no)</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">md: Autodetecting RAID arrays.</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">md: autorun ...</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">md: ... autorun DONE.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: <a href="mailto:dm-devel@redhat.com">dm-devel@redhat.com</a></span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">EXT3 FS on hda1, internal journal
</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Adding 1180768k swap on /dev/hda2. Priority:-1 extents:1 across:1180768k</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
IA-32 Microcode Update Driver: v1.14a <<a href="mailto:tigran@veritas.com">tigran@veritas.com</a>></span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">process `sysctl' is using deprecated sysctl (syscall)
net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ADDRCONF(NETDEV_UP): eth0: link is not ready</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">audit(1184898145.203:3): audit_pid=1905 old=0 by auid=4294967295</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Bluetooth: Core ver 2.10</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">NET: Registered protocol family 31</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Bluetooth: HCI device and connection manager initialized</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">Bluetooth: HCI socket layer initialized</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Bluetooth: L2CAP ver 2.8</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">Bluetooth: L2CAP socket layer initialized</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Bluetooth: RFCOMM socket layer initialized</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">Bluetooth: RFCOMM TTY layer initialized</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">Bluetooth: RFCOMM ver 1.8</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">Bluetooth: HIDP (Human Interface Emulation) ver 1.1</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ipsec: Unknown symbol abort</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">padlock: VIA PadLock not detected.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">ipsec: Unknown symbol abort</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">agpgart: Found an AGP 2.0 compliant device at 0000:00:
00.0.</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode</span><br style="color: rgb(0, 0, 153);"><span style="color: rgb(0, 0, 153);">[drm] Setting GART location based on new memory map</span><br style="color: rgb(0, 0, 153);">
<span style="color: rgb(0, 0, 153);">[drm] writeback test succeeded in 2 usecs</span><br><br> ==============================<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
===========================<br>><br>> KLIPS26 module built successfully.<br>> ipsec.ko is in /root/openswan/openswan-3.0.06/modobj26<br>><br>> -rw-r--r-- 1 root root 3800436 Jul 19 09:32 ipsec.ko<br>> text data bss dec hex filename
<br>> 270171 19752 5412 295335 481a7 ipsec.ko<br>><br>> <span style="font-weight: bold;">use make minstall as root to install it</span><br>><br>> =========================================================
</blockquote><div><br>Do i need to run make minstall again? i tried it and gives me the error !! <br></div><br><span style="font-weight: bold;">Ok, so it looks to me like you have not loaded OCF.</span><br style="font-weight: bold;">
<br>I havn't touched the OCF part yet, but for openswan 3.x.x, do I need to do anything for loading OCF? And if I do, then what should be done? <br><br><br><div><span class="gmail_quote">On 7/19/07, <b class="gmail_sendername">
David McCullough</b> <<a href="mailto:David_Mccullough@securecomputing.com">David_Mccullough@securecomputing.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>Jivin Ankit Parikh lays it down ...<br>> I tried the attached patch:<br>><br>> Here,s the output I got<br>...<br>> =========================================================<br>><br>> KLIPS26 module built successfully.
<br>> ipsec.ko is in /root/openswan/openswan-3.0.06/modobj26<br>><br>> -rw-r--r-- 1 root root 3800436 Jul 19 09:32 ipsec.ko<br>> text data bss dec hex filename<br>> 270171 19752 5412 295335 481a7
ipsec.ko<br>><br>> use make minstall as root to install it<br>><br>> =========================================================<br><br>Looks good.<br><br>> make[1]: Leaving directory `/root/openswan/openswan-
3.0.06'<br>> which: no git in<br>> (/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin)<br>> make[1]: Entering directory `/root/openswan/openswan-
3.0.06'<br>> ( OSMODLIB=`make -C /lib/modules/2.6.18.8/build -p help | ( sed -n -e<br>> '/^MODLIB/p' -e '/^MODLIB/q' ; cat > /dev/null ) | sed -e 's/^MODLIB[<br>> :=]*\([^;]*\).*/\1/'` ; \
<br>> if [ -z "$OSMODLIB" ] ; then \<br>> OSMODLIB=`make -C /lib/modules/2.6.18.8/build -n -p<br>> modules_install | ( sed -n -e '/^MODLIB/p' -e '/^MODLIB/q' ; cat > /dev/null
<br>> ) | sed -e 's/^MODLIB[ :=]*\([^;]*\).*/\1/'` ; \<br>> fi ; \<br>> if [ -z "$OSMODLIB" ] ; then \<br>> echo "No known place to install module. Aborting." ; \
<br>> exit 93 ; \<br>> fi ; \<br>> set -x ; \<br>> mkdir -p $OSMODLIB/kernel/net/ipsec ; \<br>> cp /root/openswan/openswan-3.0.06/modobj26/ipsec.ko<br>> $OSMODLIB/kernel/net/ipsec ; \
<br>> if [ -f /sbin/depmod ] ; then depmod -a ; fi; \<br>> if [ -n "net/ipsec" ] ; then \<br>> mkdir -p $OSMODLIB/kernel/net/ipsec ; \<br>> if [ -f $OSMODLIB/kernel/ipsec.ko -a -f
<br>> $OSMODLIB/kernel/net/ipsec/ipsec.ko ] ; then \<br>> echo "WARNING: two ipsec.ko modules found in<br>> $OSMODLIB/kernel:" ; \<br>> ls -l $OSMODLIB/kernel/ipsec.ko
<br>> $OSMODLIB/kernel/net/ipsec/ipsec.ko ; \<br>> exit 1; \<br>> fi ; \<br>> fi ; \<br>> set -x ) ;<br>> + mkdir -p /lib/modules/2.6.18.8/kernel/net/ipsec
<br>> + cp /root/openswan/openswan-3.0.06/modobj26/ipsec.ko<br>> /lib/modules/2.6.18.8/kernel/net/ipsec<br>> + '[' -f /sbin/depmod ']'<br>> + depmod -a<br>> + '[' -n net/ipsec ']'
<br>> + mkdir -p /lib/modules/2.6.18.8/kernel/net/ipsec<br>> + '[' -f /lib/modules/2.6.18.8/kernel/ipsec.ko -a -f<br>> /lib/modules/2.6.18.8/kernel/net/ipsec/ipsec.ko ']'<br>> + set -x<br>> make[1]: Leaving directory `/root/openswan/openswan-
3.0.06'<br>><br>> But when i did service ipsec start , I got the following: Also, it takes a<br>> around a min to get the output after trying to start the service !<br>><br>> root@localhost openswan-3.0.06
]# service ipsec start<br>> ipsec_setup: Starting Openswan IPsec 3.0.06GITGITGIT...<br>> ipsec_setup: FATAL: Error inserting ipsec<br>> (/lib/modules/2.6.18.8/kernel/net/ipsec/ipsec.ko): Unknown symbol in module,
<br>> or unknown parameter (see dmesg)<br>> ipsec_setup: calcgoo: warning: 2.6 kernel with kallsyms not supported yet<br>> ipsec_setup: insmod /lib/modules/2.6.18.8/kernel/drivers/crypto/padlock.ko<br>> ipsec_setup: FATAL: Error inserting padlock
<br>> (/lib/modules/2.6.18.8/kernel/drivers/crypto/padlock.ko): No such device<br>> ipsec_setup: insmod /lib/modules/2.6.18.8/kernel/net/ipsec/ipsec.ko<br>> ipsec_setup: FATAL: Error inserting ipsec<br>> (/lib/modules/2.6.18.8/kernel/net/ipsec/ipsec.ko): Unknown symbol in module,
<br>> or unknown parameter (see dmesg)<br>> ipsec_setup: kernel appears to lack IPsec support (neither CONFIG_KLIPS or<br>> CONFIG_NET_KEY are set)<br><br>Ok, so it looks to me like you have not loaded OCF.<br><br>
If you had run "dmesg" you probably would have seen which modules were<br>missing and that would be a big help.<br><br>Alternatively you are not runnin gteh new kernel that you just build.<br>Remember you had to patch the kernel, and unless you are running that
<br>kernel the support for klips will not be there.<br><br>Cheers,<br>Davidm<br><br>> Isn't the KLIPS stack set by above make ?<br>> I have attached both the files for reference !<br>><br>> Regards,<br>> Ankit
<br>><br>><br>><br>> On 7/18/07, David McCullough <<a href="mailto:David_Mccullough@securecomputing.com">David_Mccullough@securecomputing.com</a>> wrote:<br>> ><br>> ><br>> >Jivin Ankit Parikh lays it down ...
<br>> >> I recompiled the kernel(ver <a href="http://2.6.18.8">2.6.18.8</a>) and did make<br>> >> KERNELSRC=/lib/modules/'uname -r'/build module minstall<br>> ><br>> >Try the attached patch.
<br>> ><br>> >Cheers,<br>> >Davidm<br>> ><br>> >--<br>> >David McCullough, <a href="mailto:david_mccullough@securecomputing.com">david_mccullough@securecomputing.com</a>, Ph:+61<br>> >734352815
<br>> >Secure Computing - SnapGear <a href="http://www.uCdot.org">http://www.uCdot.org</a><br>> ><a href="http://www.cyberguard.com">http://www.cyberguard.com</a><br>> ><br>> ><br>><br>><br>
> --<br>> Ankit Parikh<br>> MS, Computer Science<br>> University of Southern California<br>> Los Angeles<br>> California<br>> (M) 213.448.9394<br><br><br><br><br>--<br>David McCullough, <a href="mailto:david_mccullough@securecomputing.com">
david_mccullough@securecomputing.com</a>, Ph:+61 734352815<br>Secure Computing - SnapGear <a href="http://www.uCdot.org">http://www.uCdot.org</a> <a href="http://www.cyberguard.com">http://www.cyberguard.com</a><br></blockquote>
</div><br><br clear="all"><br>-- <br>Ankit Parikh<br>MS, Computer Science<br>University of Southern California<br>Los Angeles<br>California<br>(M) 213.448.9394